Posts

Anderson-Negele provides application-specific hygienic Sensor solutions

Morton Controls in partnership with  Anderson-Negele provides application-specific hygienic sensor solutions and support for safe processing in the Food & Beverage and Pharmaceutical markets.

TFP-164

TFP-164 Flush Temperature Sensors – Temperature Measurement in vessels and pipes with flush Hygienic process fitting.

APPLICATIONS:

Applications include monitoring of temperature measurement in vessels with agitators and stirrers and in pipes where an inserted probe is not suitable.

FEATURES:

  • Product contacting materials compliant to FDA
  • Sensor completely made of stainless-steel resp. PEEK (front flush sensor)
  • Conforming to 3-A Sanitary Standard 74-06 for front flush sensors
  • Front flush mounting possible
  • Integrated transmitter optional
  • Different electrical connections available

P41


P41 Pressure Sensors – Pressure transmitter device for hygienic pressure monitoring for various applications in breweries, dairies and food & beverage industries.

APPLICATIONS:

Sanitary pressure measurement in pipes and tanks for process temperatures up to 250 °C for ranges from 0.2 to 40bar.

FEATURES:

  • Hygienic process connection with G1/2″ & G1” CLEANadapt
  • Rapid response time of < 10 ms
  • Vacuum-proof
  • Full stainless-steel body & easy installation
  • Electrical connection with M12 plug connection
  • Available with relative or absolute measurement cell
  • Built-in two-conductor measurement converter 4…20 mA

HM-E

HM-E Turbine Flow Sensors – Measurement of flow rate and volume in hygienic applications.

APPLICATIONS:

Designed for hygienic applications in food-, beverage- and pharmaceutical Industries e.g. Process water, demineralized water, aqueous media such as filtered fruit juice or beer, alcohols, light oils, saline solutions, cleaning agents, and acids.

FEATURES:

  • High quality and hygienic alternative to industrial, non-hygienic turbine, paddle wheel or variable area flowmeters
  • Economical alternative to mass flowmeters in non-conductive, low-viscosity media
  • Cost-effective and compact alternative to magnetic-inductive & Coriolis flowmeters
  • Hygienic design, confirmed by 3-A & FDA certification

NCS-M-12

NCS-M-12 Level Sensors – capacitive limit detection in metallic vessels and pipes with hygienic thread G1/2″ (CLEANadapt)

APPLICATIONS:

Limit detection of fluid also with low or no water content like syrup, fruit concentrates, alcohols and oils with a dielectric constant εr (Dk) ≥ 2

FEATURES:

  • Hygienic process connection with CLEANadapt
  • Conforming to 3-A Sanitary Standard
  • All wetted materials are FDA-conform
  • CIP- / SIP cleaning up to 143 °C / max. 120 minutes
  • Compact installation size
  • Capacitive measuring principle
  • Independent of the medium conductivity
  • Insensitive to foam and adherence
  • Very short response time (< 100 ms)

Anderson Negele’s ILM-4 conductivity sensor with IO-Link

Conductivity sensor with IO-Link

The ILM-4 conductivity sensor with IO-Link is a big step to industry 4.0 in hygienic process technology.

Proven industry standard now also for hygienic and aseptic applications

IO-Link offers advantages in process control and monitoring. The ILM-4 conductivity sensor, the first of a whole range of measuring instruments to be equipped with an additional IO-Link interface, is a well-known and proven conductivity sensor on the market. This will be followed in due course by the sensors ITM-51 for turbidity, NSL-F for level, L3 for pressure and D3 for differential pressure and volume, all based on the modular platform with fail-safe plug-and-play technology with standard cable for time-and-cost-saving installation and set-up.

The (R)evolution of conductivity measurement

IO-Link offers significant advantages over analogue technology when it comes to reliably controlling the entire process technology with many measuring points, control and operating elements. Set-up and installation are easy and cost-effective. A three-pole standard cable is sufficient for the signal transmission and power supply itself. In practice, point-to-point connections are made at field level from various sensors to collection points, so-called IO-Link masters, and from there via Fieldbus system to the control centre.

 

Simple data transfer becomes intelligent communication

With IO-Link, data streams in the opposite direction towards the sensors are now also possible. In this way, the status of the sensor can be checked and specifically queried at any time. This makes it possible to detect potential faults, signs of wear or an increased risk of failure at an early stage and helps to avoid production downtimes.

“Plug-and-play” takes on a whole new meaning

Sensor replacement of the ILM-4 with IO-Link becomes easier and safer than ever before and can be carried out independently, at any time and by any employee without any programming effort. The device configuration of each connected sensor can be stored in the IO-Link Master. Immediately when plugged in, the new sensor is automatically recognized, configured and parameterized by the IO-Link Master.

The new dimension in hygienic measuring technology is digital and analogue, compact or remote. It is: modular

ILM-4 conductivity transmitter with IO-Link creates planning security and flexibility for status control and sensor diagnostics for preventative maintenance avoids production downtime.  The combination with the modular platform, with the separation of sensor and electronic unit in the optional remote version, creates a unique constellation of hardware and software that is unparalleled in flexibility, simplicity and system compatibility.